Belastungswächter BH 9097.38/000

Load monitor for monitoring electrical industrial drives for symmetrical loading of all three phases. It monitors the active power consumption of motor loads.

Features

•  according to IEC/EN 60 255, DIN VDE 0435-303 
•  Detection of underload P1, overload P2, overload P1 (warning level) and overload P2 (switchable) 
•  Setting of P1 and P2 via absolute scale 
•  for motors up to 22 kW / 400 V or 37 kW / 690 V 
•  Measuring method: active power measurement 
•  large current measuring range through automatic range switching 
•  1 changeover contact each for signalling P1 and P2 
•  adjustable start-up override ta 
•  adjustable pickup delay tv 
•  with or without memory function, switchable 
•  Test / reset button for easy commissioning and as setting aid 
•  up to 40 A without external current transformer 
•  Working current principle (output relay activated in case of fault) or resting current principle (output relay not activated in case of fault) 
•  Switchable optionally for 1-phase loads LED displays 
•  45 mm width

Application

The load monitor is suitable for monitoring electrical industrial drives with variable motor load. Design and function: The load monitor BH 9097 monitors the active power consumption of electrical loads. Due to the 1-phase measuring principle, symmetrical loading of all 3 phases is assumed, as is usual with motor loads. Using DIP switches, the device can be configured as an underload and overload monitor P1 min / P2 max. or as an overload monitor with warning level P1 max. / P2 max. The settings for P1 and P2 are calibrated as absolute values in watts and are made via two rotary switches. 2 LEDs indicate the switching status of the associated output relays. The relays can be configured for working current or resting current principle. Each relay is subject to a separately adjustable pickup delay tv and a jointly adjustable start-up override ta.

Measuring current (see table): B, D, F